Fisherman's Inn
Bundaberg, Qld               -     Follow the progress of how we build your Seafood Display Cabinet.
                                              We manufacture with 31 years of experience.
                                              ''On a recent sales trip to Cairns, Port Douglas and Atherton Tablelands I visited many 
                                               Shops that had our Display Cabinets, some were 25 years plus in age
                                               and still going strong and looking good.''  -  Neil Dobe, Director

S/S Base frame has been welded, S/S Body and S/S Legs are being attached	S/S Sub Frame is fitted for extra strength, only S/S, no wood frame like others use (wood will rot in time)	S/S inside bottom is fitted ready for coldplate, notice how we use all S/S construction, no wood frame
Coldplate drains are fully welded in	S/S Bag undershelf is fitted, S/S Top is ready to fit	Tubes are S/S strap welded to coldplate, they will never let go, others use pinning which will let go in time
S/S Coldplate has refrigeration tubes thermopasted for better heat transfer.	TX Valves are fitted to coldplate with larger Header Tubes for better flow of refrigerant to and from coldplate, others just T join and hope it works.	Fully Welded Base Frame is how we start building a cabinet, we have been doing it this way for the last 20 years, S/S Base and Sub Frame for Strength
S/S Coldplate is fitted into cabinet body	Two Pack Pour Foam is mixed individually and carefully because it expands shortly after being mixed	The Tradesman quickly and carefully pours it into the coldplate cavity before it expands

Bracing must be secure so cabinet walls stay firm as the foam has tremendous strength	Pour is finished, Cabinet is tipped up and bracing is removed	TX Valves are fitted to Cross Finned Topcoils these control the flow of refrigerant (R404A) to each coil so an even temperature can be obtained in the Display Cabinet.
Vented Drain Trays for Topcoils, these catch droplets from the Topcoils, but still lets cold air fall to the product below (solid drain trays will restrict air flow)	Vented Drain Trays for Topcoils are installed	Double Glazed Panels are installed to front of cabinet
Double Glazed Panels are installed to front of cabinet Colour Flash is installed	Sliders c/w full width s/s handles on s/s top & bottom tracks c/w s/s roller wheels	Tubes for Coldplate & Topcoils exiting under cabinet, 25mm drain hoses each end & centre, s/s TX cover, Bag Tray Under

Cabinet Finished ready for dispatch to site